Pioneer AL600 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Koloběžky Pioneer AL600. Pioneer AL600 User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 11
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
AL600 Pioneer
Hybrid Platform Lift (HPL)
Installation Guide & Owner’s Manual
Congratulations on your new lift purchase. The AL600 Pioneer is one of the easiest
and most trouble free ways to transport your chair or scooter. This manual is written
to be used both as an installation guide as well as an operation guide for the end user
Refer to the index below for the sections that apply to your lift and options.
Please read the manual thoroughly BEFORE attempting any installation,
adjustment or use of the lift.
Both installers and operators should familiarize themselves with this entire manual.
If you have any questions or comments concerning the installation or operation of your
scooter/chair lift, please contact your local distributor for additional technical information.
Only authorized dealers should install this lift.
Caution: Some scooters and chairs may be unsuitable for transport in or on a
motor vehicle. Please contact the manufacturer of your mobility device to
determine its transportability.
Zobrazit stránku 0
1 2 3 4 5 6 ... 10 11

Shrnutí obsahu

Strany 1 - AL600 Pioneer

AL600 Pioneer Hybrid Platform Lift (HPL) Installation Guide & Owner’s Manual Congratulations on you

Strany 2 - Leg Assembly

Parking the Scooter on the Platform: Before loading the scooter, verify that the platform has been lowered all the way to the ground. Set your scoo

Strany 3 - To back

SAFETY: · Caution: Do not operate this lift until your dealer has satisfactorily instructed you in the proper operation of the lift. · Your Harmar l

Strany 4 - J-Bolt must

Unpacking the Lift Detailed below is the inventory of parts included with your lift. If any parts are missing

Strany 5 - PLATFORM

Important Note: IMPROPER WIRING IS THE #1 CAUSE OF PROBLEMS IN THE OPERATION OF A VEHICLE LIFT. FOLLOW THE WIRING INSTRUCTIONS CAREFULLYLocated in th

Strany 6 - Installing the Pioneer

Leg AssemblyFoot PlateThis part of the J-Bolt must face toward the front of the vehicle This part of the leg assembly must face toward the rear of the

Strany 7

This part of the leg assembly must face toward the rear of the vehicle.Leg Assembly5/16 x 4” Bolt5/16” WasherInstallation Washer5/16” Lock Washer5/16”

Strany 8 - Loading a Power Chair

Installing the Pioneer Extending the Lift: Push the down button on the hand control to extend the lift in the horizontal direction. CAUTION: Wa

Strany 9

There are 2 options on how to attach the strap hooks to the chair that are included with the lift. Anchor Plate: The Anchor Plate is a flat plat

Strany 10 - Loading a Scooter

Loading a Power Chair Parking the Chair on the Platform: Before loading the power chair, verify that the platform has been lowered all the way to t

Strany 11 - TROUBLESHOOTING:

Modifying the Platform for use with Scooters: Contained in the lift box will be the front wheelscooter adapter. This must be attached to the p

Komentáře k této Příručce

Žádné komentáře