Pioneer VSX-816 Uživatelský manuál stáhnout pdf (Strana 10)

Quick surround sound setup03

6 Follow the instructions on-screen.

• Make sure the microphone is connected.

• If you’re using a subwoofer, it is

automatically detected every time you

switch on the system. Make sure it is on

and the volume is turned up.

• See below for notes regarding background

noise and other possible interference.

7 Wait for the test tones to finish.

A progress report is displayed on-screen while

the receiver outputs test tones to determine

the speakers present in your setup. Try to be as

quiet as possible while it’s doing this.

• For correct speaker settings, do not adjust

the volume during the test tones.

8 Confirm the speaker configuration.

The configuration shown on-screen should

reflect the actual speakers you have.

If the speaker configuration displayed isn’t

correct, use

/

to select the speaker and

/



to change the setting (and number for

surround back). When you’re finished, go to

the next step.

If you see an error message (

ERR

) in the right

side column, there may be a problem with the

speaker connection. If selecting

RETRY

doesn’t fix the problem, turn off the power and

check the speaker connections.

9 Make sure ‘OK’ is selected, then press

ENTER.

A progress report is displayed on-screen while

the receiver outputs more test tones to

determine the optimum receiver settings for

channel level, speaker distance, and Acoustic

Calibration EQ.

Again, try to be as quiet as possible while this

is happening. It may take 3–8 minutes.

10 The Auto MCACC Setup has finished!

Select ‘SKIP’ to go back to the System Setup

menu.

The MCACC indicator on the front panel will

light to show the setup is complete.

The settings made in the Auto MCACC Setup

should give you excellent surround sound from

your system, but it is also possible to adjust

these settings manually using the System

Setup menu (starting on page 34).

You can also choose to view the settings by

selecting individual parameters from the

Analyzed Data Check

screen:

•

Speaker Setting

– The size and number of

speakers you’ve connected (see page 40

for more on this)

•

Speaker Distance

– The distance of your

speakers from the listening position (see

page 42 for more on this)

2.Auto MCACC

Now Analyzing

Environment Check

Ambient Noise [ OK ]

Microphone [ ]

Speaker YES/NO [ ]

:Cancel

2.Auto MCACC

CHECK!

Front [ YES ]

Center [ YES ]

Surround [ YES ]

SB [ Yx2 ]

SUB W. [ YES ]

:Cancel

Note

1• Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 5 inches (12cm)

will end up with different size settings. You can correct the setting manually using the

Speaker Setting

on page 40.

• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be

accurate (taking delay and room characteristics into account) and generally does not need to be changed.

2.Auto MCACC

Now Analyzing

Surround Analyzing

Speaker System [ ]

Speaker Distance [ ]

Channel Level [ ]

Acoustic Cal EQ [ ]

:Cancel

VSX_816.book.fm 10 ページ２００５年１２月８日　木曜日　午後６時５４分

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Komentáře k této Příručce

Žádné komentáře

Pioneer VSX-816 Uživatelský manuál Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Přijímače a zesilovače Pioneer VSX-816