Return to Top of Page
Q24: What happens to the original data when a DVD-RW disc is initialized?
A24: Doing a quick format initialization within the PRV-LX1 erases all the data but retains the lead
in/out data for quicker finalization times when re-recording on RW media. If you choose full blank for
initializing DVD-RW media the LX1 erases all data including the lead in/out information. Also,
performing a quick format initialization of DVD-RW media within the PRV-LX1 takes about 1-2 minutes.
Performing a full blank initialization takes about 60 minutes. Note: Erasing the lead in/out data on
DVD-RW media increases finalization times for all new recordings if a minimum of 35mm of data from
the inner radius has not been met.
Return to Top of Page
Q25: What happens if disc finalization is cancelled or interrupted before it is completed?
A25: If the finalization process is cancelled or interrupted, the disc is not finalized and you will need to
restart the process from the beginning.
Return to Top of Page
Q26: Is it possible to control an external DV deck, DV camera, or computer via IEEE-1394?
A26: Yes. The PRV-LX1 can control DV decks, cameras, and computers (equipped with a firewire
card) through the IEEE-1394 interface. This setting is available within the operation section of the
recorder's Function menu. However, some DV decks and cameras are not compatible and may return
an "unknown device error" message.
Return to Top of Page
Q27: Does the PRV-LX1 provide progressive scan output?
A27: Progressive scan output is only available when using the component video output connectors of
the recorder. To turn progressive scan ON or OFF, the PRV-LX1 must be powered on. To
activate/de-activate progressive scan, press and hold the "Stop" and "DownArrow" buttons on the
unit's front panel Note: When using progressive scan output, video is not sent through the other
connectors on the rear of the recorder. Switching progressive scan On or OFF during disc playback is
blocked. Your monitor must support progressive scan video for proper image reproduction.
Return to Top of Page
Q28: Can the PRV-LX1 output Interlace video from the IEEE-1394, component, S-Video, and
composite outputs simultaneously?
A28: Yes, the PRV-LX1 can display interlace video from all output connectors simultaneously.
Return to Top of Page
(83 stránky)
(29 stránky)
(29 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce